Creating Your Own Pattern - Epson PowerLite 826W+ User Manual

note
When you choose an image
for the user pattern, it erases
any previously used image.
Using the Remote Control
40

Creating Your Own Pattern

You can transfer any image from your computer or video source to the
projector and then use it as a pattern. If you assign it to the
button as described on page 39, you can display it any time you want
by simply pressing the
Start by displaying the image you want to use from a computer or
other source. Then follow these steps to capture the image and transfer
it to the projector:
1. In the Settings menu, highlight
2. Select
User Pattern
3. When you see a message asking if you want to use the current
image as the pattern, select
4. Press again.
Enter
5. When you see a confirmation message, select
. Saving the image may take a few moments. Do not use
Enter
your projector, remote control, or video source while the logo is
being saved.
6. When you see a message that saving is complete, press
exit.
button on the remote control.
User
and press
Pattern
and press .
Enter
and press
Yes
User
.
Enter
.
Enter
and press
Yes
to
Menu