Table of Contents
Advertisement
note
On some Windows systems,
you can right-click
My Network Places or
Network Neighborhood
on the desktop and select
Properties.
Settings may vary,
depending on your wireless
network adapter. See the
documentation for your
adapter for more
information.
Using the Projector on a Network
80
10. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
11. When you're done making these settings, highlight the
button at the top of the screen, then press
and press
Complete
save your settings.
Now you're ready to set up your computer for wireless projecting. Go
to "Configuring the Network Settings for Windows" below, or go to
"Setting Up Your Mac for Access Point Mode" on page 86. If you
want to enable security options for your network, see page 88 to set up
the option that your network uses on the projector.
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings
for your computer's wireless card or adapter match the settings you
entered for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click
and Internet Connections
icon. You see a screen similar to this:
Connections
Right-click and select
Properties
setting to
.
Off
Enter
, then choose
Enter
Yes
Start > Control Panel > Network
. Then click the
Return
. Choose
and press
to
Enter
Network
Advertisement
Table of Contents
