PowerLite 85+/825+/826W+ ® Quick Setup Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector.
You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see the User’s Guide on your projector CD.
Network configuration If you need to configure the projector for your network, you can use the projector’s menu system. NOTE: If you’re using the optional Wireless 802.11a/b/g Module, see the User’s Guide on your projector CD for configuration instructions. Press the Menu button on the remote control, select the Network menu, then press Enter.
If you’re using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor (allow a few seconds for the projector to sync up after you press the key). It may be labelled CRT/LCD or have an icon such as down the Fn key while pressing it.