Table of Contents
Advertisement
You see vertical bands or the image still looks blurry after
trying the solutions in the previous section.
If you're projecting from a computer and displaying an image that
■
contains a lot of fine detail, you may notice vertical bands or some
of the characters may look heavy or blurred. Press the
button on the remote control to reset the projector's tracking and
sync settings.
■
If further adjustment is needed, you can fine-tune the
and
settings manually using the Signal menu, as described
Sync
on page 106.
1. Fill the screen with an image containing fine detail, such as
black text on a white background.
2. Adjust the
Tracking
3. Adjust the
Sync
The image is too light or dark, or colors are incorrect.
Press the
■
Color Mode
page 38).
Try adjusting the brightness and color settings in the Image menu
■
(see page 104).
Try changing the
■
Power Consumption
(see page 108).
Check your computer display settings to correct the color balance.
■
to eliminate vertical bands.
setting to increase the image sharpness.
button to select a different color mode (see
in the Settings menu
Auto
Tracking
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.
Solving Problems
143
Advertisement
Table of Contents
