Installing An Expansion Card Into The Expansion Card Riser 2 Or 3 - Dell EMC PowerEdge R730xd Owner's Manual

Figure 52. Removing an expansion card from expansion card riser 2 or 3
1. expansion card
3. expansion card riser
5. expansion card connector
Next steps
1. Install an expansion card into the expansion card riser.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 67
Related tasks
Before working inside your system

Installing an expansion card into the expansion card riser 2 or 3

After working inside your system
Installing an expansion card into the expansion card riser 2 or 3
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
118 Installing and removing system components
on page 68
on page 68
2. expansion card latch
4. power connector (for GPU cards)
on page 118