Table of Contents
Advertisement
5.13 "Time" Screen
The "Time" screen (Figure 5.13) is a "read and write" screen that allows you to set the current date and time for the SDE-
4AV-QAM. To remain compliant with ATSC and cable standards, it is important to have the accurate date and time stamps.
For this reason, it is recommended to use the "NTP Server" option which allows the unit to automatically acquire time
settings from a "NTP Server" - you must enter the IP address of the time server (see
1
2
3
Time Adjustments: In this section, the local time zone based on Coordinated Universal Time (UTC) can be set.
1
Daylight Saving Time: In this section, the user can set the Daylight Saving Settings either manually or automatically
2
using the DST Adjustment option.
NTP Server: In this section, the user can enter the IP address of the NTP server to acquire the time directly from the
3
NTP Server when an internet connection is available. (see
Set Date & Time: In this section, the user can manually enter the date and time.
4
Apply All Time Settings: A common button to apply all changes made on the entire page.
5
4
5
Figure 5.13 - "Time" Screen
4
of Section 5.12.1 for details).
MPEG-2 Encoder
Instruction Manual
19
of Section 5.12.1 for details).
31
Advertisement
Table of Contents
