Table of Contents
Advertisement
14 MPEG-2 Encoder
Instruction Manual
5.2 "Main > Status" Screen
The "Main > Status" screen (Figure 5.2) is a "read only" screen and displays the following information:
In the section entitled "TS" under an orange header, the following parameters about each output are displayed:
TS: indicates the selected program's information. The program information includes the PMT PID, Program
1
number, Short Name, Major-minor channel number, Video elementary stream PID, Video input source,
Audio elementary stream PID, and Audio input source.
Bitrates: indicates the transport stream bitrate and the TS Bitrate (refer to
2
In the section entitled "Output" under blue header, the following parameters about each output are displayed:
IP: indicates the encapsulation method, IP address, and the port number to which an output is assigned.
3
The MPTS stream contains all 4 programs. Each SPTS P# contains one program from the respective input
# (ie: SPTS P1 IP is from input program 1 (P1), SPTS P2 IP is input program 2, etc.).
QAM: indicates the RF channel number of the QAM output.
4
ASI: indicates that ASI output assigned.
5
Find My SDE/HDE: This radio button is used to easily physically identify the encoder presently being
6
communicated with. When clicked on, all A/V LED's on the front panel of the encoder will simultaneously
flash green for 1 minute. This feature is provided on all webpages.
1
2
Figure 5.2 - "Main > Status" Screen
3
4
of Section 5.7 for details).
2
5
Advertisement
Table of Contents
