Table of Contents
Advertisement
20 MPEG-2 Encoder
Instruction Manual
5.6 "Main > TS Map" Screen
The "Main > TS Map" screen (Figure 5.6) is a "read and write" screen to assign programs to TS (s):
In the section entitled "Inputs" under the green header, the user can select the programs to be included in the
1
output TS1 as follows:
• Select the desired programs (typically all 4 input programs)
• Add: Once the selection of programs is completed, select the "Add" button. This will add the selected programs to
the Output as shown in
In the section entitled "Output" under an orange header, the user can view the list of the programs that are present
2
in output TS1.
TS1 - IP/QAM/ASI: indicates Transport Stream #1 and the type of outputs assigned to it (IP, QAM and/or ASI).
The fields under the "TS1 - IP/QAM/ASI" under grey header, displays the list of the programs and the
corresponding total bitrate present.
• Remove: The user can remove any of the programs from the current list by selecting it and clicking the
"Remove" button.
1
Figure 5.6 - "Main > TS Map" Screen
2
of Figure 5.6.
2
Advertisement
Table of Contents
