Removing/Installing The Shrouds; Removing/Installing The Rear Shroud; Removing/Installing The Front Shroud - Invacare TDXSP2V User Manual

Invacare® TDX® SP2 Series

9.6 Removing/Installing the Shrouds

CAUTION!
– Place the wheelchair in a well ventilated area
where work can be performed without risking
damage to carpeting or floor covering.

9.6.1 Removing/Installing the Rear Shroud

Removing the Rear Shroud
1. Verify the joystick On/Off switch is in the Off position.
2. Remove the knob screw A that secures the rear shroud
B to the base frame C.
3. Remove the rear shroud from the base frame.
70
Fig. 9-1
Installing the Rear Shroud
1. Install the rear shroud B and secure in place with knob
screw A.

9.6.2 Removing/Installing the Front Shroud

Removing
1. Remove the front riggings.
2. Remove the knobs D securing the front shroud to the
battery box E.
Installing
Fig. 9-2
60101877-B