them replaced by a qualified technician.
10.3.2 Replace Every 18 Months
Replace gearbox coupling.
10.4 Removing/Installing the Shrouds
CAUTION!
-Place the wheelchair in a well ventilated area where
work can be performed without risking damage to
carpeting or floor covering.
10.4.1 Removing/Installing the Rear Shroud Assembly
Fig. 10-1 Removing/Installing the Rear Shroud Assembly
Seat assembly not shown for clarity.
60101916-A
Fig. 10-2 Removing/Installing the Rear Shroud Assembly -
Disconnecting the lighting board
Removing the Rear Shroud Assembly
1. Verify the joystick On/Off switch is in the Off position.
2. Pull up to disengage the top of the rear shroud assembly A
from the battery box B.
3. Pull up to disengage the keyholes C from the
battery box pegs D.
4. Remove the rear shroud assembly from the battery box,
one side at a time.
10 Service
75