Programmation Code; Calling; Programmation Codes Wizard - Fasttel Wizard Bronze Manual

Bronze 1.4

2. Programmation code

You can only change the settings which you will find further on in this guide after you have
entered the programmation code.
How :
Call the extension number or phone number on which the Wizard is connected.
The Wizard will pick up with de DTMF tones or the recorded speech message (optional)
- enter *1996* on the keypad of your phone
After the correct entering of the digits, the Wizard will answer with 3 tones.
Eg. * 1 9 9 6 * teet teet tuut
The Wizard is now ready to accept your settings.
Remark : The Wizard will quit the line if no DTMF codes are received within 10 seconds. This will first be confirmed by 2
beeps (error).
Each correct programmation code will be confirmed by one beep.
Each incomplete or incorrect code will be confirmed by 2 beeps (error).
Eg. Programmation code 710. You do nothing, 10 seconds later beep beep and the Wizard quits the line.

3. Calling

You can call the Wizard for :
Direct communication of programming. The Wizard answers automatically after a
preprogrammed number of rings. On delivery the Wizard is set to 1 ring. You can change this
setting.
How ?
Code 84XX XX is the number of rings before the Wizard will answer.
00 stands for 255 rings
01 stands for one ring, 02 for two, 99 for ninety-nine.
Remark : automatic calling: let ring at least one time and not more the 3 times. You put the
phone down and call back within 20 seconds.
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email: info@fasttel.com
Web : WWW.FASTTEL.COM
9 Bronze 1.4

4. Programmation codes Wizard

In the table below you find all the programmation codes to personalize the behavior of the
Wizard. (only after forming *1996* by telephone during conversation)
Code 530
DESCRIPTION
Calling
st
1 button, 1
st
1 button, 2
Redial - occupied/repeat n/y
Number of ring next destinat.
Number X repeat when occup.
nd
2 day number active
Day/Night setting
DTMF/Impulse dialling
Password active contact n/y
Password for security
End conversation code
(Door) contact code
Maximum conversation time
Impulse / toggle contact
Time duration contact
Steps 5 sec./100msec.
Setting speaker/micro
ID code
DTMF/speech active yes/no
# after ID no/yes
DTMF/Speech 1 on line
DTMF/Speech 2 on LS
DTMF/speech active no/yes
Door station transparent n/yes
Waiting for dialling tone n/y
Activate relay FT8SW with short code 2
Codes keypad
Conversation acceptance
Doorcontact after pushing y/n
Complete reset of Wizard
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email: info@fasttel.com
Load default values factory settings
Default table
CODE
84XX
st
destination 710
nd
destination 711
660/661
82XX
83XX
650/651
# 8X
600/601
550/551
85XXXX
4xx
2xx
80XX
610/611
81XX
520/521
88XX
700
670/671
500/501
560/561
570/571
670/671
540/541
620/621
936ab
920miaaxxxx#
1*0/1*1
510/511
530
FASTTEL Klipsenstraat 18A 9160 Lokeren
Web : WWW.FASTTEL.COM
10
default
01
empty#
empty#
661
10
05
650
Day
600
550
1111
09
02
08
610
10
521
07
1111#
671
500
560
571
671
540
621
936*1
empty
1*0
510
530