Main Emp Monitor Window; Button Functions - Epson EMP-6100 Operation Manual

Main EMP Monitor window

The main window shows the status information for each projector. To carry
our operations for projectors, select the projectors from the projector list and
then click the buttons.
To close the window, click the
Buttons
Projector list
in the top-right corner.

Button functions

The power can be turned on or off and the input source can be changed for
the projectors that are selected from the projector list. The same operations
can also be carried out using the commands in the [Tools] menu.
Detail display Shows detailed information for the selected projectors.
Turns the projector power on.
Power ON
Power OFF Turns the projector power off.
Switches to the input source connected to the
PC1,
[Computer] port, [Computer1] port or [InputA] port.
InputA
Switches to the input source connected to the
PC2,
InputB [Computer2] port or [InputB] port.
Switches to the input source connected to the [BNC]
BNC
port.
Switches to the input source connected to the
S-Video
[S-Video] port.
Switches to the input source connected to the [Video]
Video
port.
Switches to the input source connected to the [D4]
D4
port.
Switches to the input source connected to the [DVI]
DVI,
port or [HDMI] port.
HDMI
Switches to EasyMP or EasyMP.net.
EasyMP
TIP
Some connected projectors may not be equipped with all of the above
ports or functions. If you click a button for a port or function that is
not available, nothing will happen.
8