Meanings of symbols used Indicates something that may cause injury or damage to the projector. CAUTION Indicates information that is related to a topic or which may be useful to know. Indicates a page where a related topic or more a detailed explanation is provided. Indicates the name of a projector port or a computer menu or item name.
Registration using IP address (Manual registration) ... 6 Editing the manually-registered projector list ... 6 Deleting a projector from the projector list... 6 Main EMP Monitor window Button functions... 7 Understanding the projector list... 8 Displaying detailed information ... 9...
Before starting operations Check the following points before starting up EMP Monitor. • EMP Monitor must be installed in the computer to be used for monitoring and control. • The computer and the projectors must be connected to the network.
Registering projectors for monitoring This operation is carried out when starting EMP Monitor for the first time after it has been installed and when you would like to add projectors. Once a projector has been registered, the status for the projector will be displayed automatically each time EMP Monitor is started from that point onwards.
• Projectors that have been registered using automatic detection will be re-detected on the basis of projector name and the IP addresses for these projectors will be displayed each time EMP Monitor is started. • If a password entry screen is displayed, enter the password for the projector's Administrator and then click [OK].
Registering projectors for monitoring Registration using IP address (Manual registration) PROCEDURE Click [Manual registration] in the [Register projector] dialogue box. Enter the IP address for the projector to be registered in the [IP address] box, and then click [Confirm]. If a projector with the specified IP address is found on the network, the projector's name will be displayed, so check that it is the target projector.
Main EMP Monitor window The main window shows the status information for each projector. To carry our operations for projectors, select the projectors from the projector list and then click the buttons. To close the window, click the in the top-right corner.
The projector information that is generated when a problem is detected is stored until EMP Monitor is closed. The EMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click [Refresh] in the main window to update the status.
Main EMP Monitor window Displaying detailed information You can check detailed information on the status of individual projectors that are connected. PROCEDURE Select the projector to be checked in the main window. Click [View details]. Detailed status information will be displayed in the [Details] dialogue box.
A projector cannot be monitored or controlled using EMP Monitor Cause Is the projector connected to Connect the network cable correctly. the network correctly? "Network Cable Connections" in the accessory User's Guide Has the projector been set Check the settings for the "Network"...
Page 12
Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,...
Need help?
Do you have a question about the EMP Monitor and is the answer not in the manual?
Questions and answers