Main Emp Monitor Window; Button Functions - Epson Artisan EMP-830/EMP-835 Operation Manual

Main EMP Monitor Window

The main window shows the status information for each projector. To carry
our operations for projectors, select the projectors from the projector list and
then click the buttons.
To close the window, click the
Buttons
Projector list
in the top-right corner.

Button Functions

The power can be turned on or off and the input source can be changed for
the projectors that are selected from the projector list. The same operations
can also be carried out using the commands in the "Tool" menu.
"View details"
Shows detailed information for the selected projectors.
button
Power ON Turns the projector power on.
Power OFF Turns the projector power off.
PC1, Switches to the input source connected to the
[Computer1] port, [Computer] port or [InputA] port.
InputA
PC2, Switches to the input source connected to the
InputB [Computer2] port or [InputB] port.
Switches to the input source connected to the [BNC]
BNC
port.
Switches to the input source connected to the
S-Video
[S-Video] port.
Switches to the input source connected to the [Video]
Video
port.
Switches to the input source connected to the [D4]
D4
port.
DVI, Switches to the input source connected to the [DVI]
HDMI port or [HDMI] port.
Switches to EasyMP or EasyMP.net.
EasyMP
TIP
Some connected projectors may not be equipped with all of the above
ports or functions. If you click a button for a port or function that is
not available, the button will not work.
EMP Monitor Operation Guide
6