Registering Projectors For Monitoring - Epson EMP-6100 Operation Manual

Registering projectors for monitoring

This operation is carried out when starting EMP Monitor for the first time after
it has been installed and when you would like to add projectors. Once a
projector has been registered, the status for the projector will be displayed
automatically each time EMP Monitor is started from that point onwards.
PROCEDURE
1 Click [Start] - [Programs] (or [All Programs]) - [EPSON
Projector] - [EMP Monitor] in that order to start EMP
Monitor.
2
Click [Register projector].
Click to add a projector to be monitored
The [Register projector] dialogue box will be displayed.
Use the "Registration using automatic detection" (
"Registration using IP address (Manual registration)" (
procedure to register projectors.
4
s
p.5) or
s
p.6)