Table of Contents
Advertisement
W5500S2E serial to Ethernet module
2.3 Quick testing guide
WIZS2E module can convert any devices with serial interface to have Ethernet
connectivity easily. It is recommended using the WIZS2E-EVB breakout board for the
evaluation testing for W5500S2E module. First insert the W5500S2E onto the
WIZS2E-EVB. Then connect the serial port of the WIZS2E-EVB using a serial-to-USB
dongle or cable to connect the USB port of the PC. Besides, connect the Ethernet port of
the WIZS2E-EVB to the Ethernet port of the PC with Ethernet cable. With this setup, the
W5500S2E becomes the bridge between the serial port and the Ethernet port.
Figure 2-8 W5500S2E module testing evaluation block diagram
W5500S2E user manual
12
Advertisement
Table of Contents
