Control Panel Messages; Status Messages; Error Messages - Epson Stylus Pro 10600 Archival Ink Quick Reference

Control Panel Messages

Control Panel Messages

Status messages

These messages indicate normal phases of printer operation.
Message
READY
PRINTING
RESET
PRESS PAUSE BUTTON
WAIT
PAUSE
INK DRY FOR
<number> MIN

Error messages

For a complete list of error messages, see your Printer Guide.
Message
INK LOW
INK OUT
LOAD ROLL PAPER
LOAD SHEET PAPER
MAINTENANCE REQ.
<error number>
Light
Operate light on
Operate light flashing
All lights flash briefly
Pause light on
Pause light on or
flashing
Pause light on
Pause light flashing
Light
Ink Out light(s) flashing
Ink Out light(s) on
Paper Out light on
Explanation or response
Printer is ready to print.
Printer is receiving data.
Printer is resetting.
Press the Pause button to continue.
Printer is warming up, performing maintenance, or
charging ink.
Printer is paused. To resume printing, press the Pause
button.
Printer is paused to let ink dry. Wait for the number of
minutes shown.
Explanation
Ink cartridge(s) nearly
empty (printing continues). by Ink Out light(s). See page 6.
Ink cartridge(s) empty
(printing stops).
Paper source setting in
print options is different
from control panel.
A maintenance part
needs to be replaced soon. EPSON.
8
Response
Replace ink cartridge(s) indicated
Replace ink cartridge(s) indicated
by Ink Out light(s). See page 6.
Make sure the right paper is loaded
and the paper source setting is the
same on the control panel and print
options.
Note the error number and contact
Continue