Download  Print this page

Epson Stylus Pro 10600 Archival Ink Quick Reference page 7

Epson stylus pro 10600: quick reference
Hide thumbs

Advertisement

Replacing Ink Cartridges (Continued)
Replacing Ink Cartridges (Continued)
3
Carefully pull the empty cartridge straight out of the
printer.
If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets into
your eyes, flush them immediately with water.
4
Make sure the replacement cartridge is the correct
color, and remove it from its package.
If you're using Archival or UltraChrome ink, shake the
cartridge gently before installing it.
5
Hold the cartridge so the arrow mark is on the left
side and points to the rear of the printer. Then insert
the cartridge into the slot. Don't force it.
If you can't insert the cartridge smoothly, you
may have the wrong cartridge. Check the
package and product code.
6
Push the cartridge clamp back into the locked
position. Make sure the corresponding
goes off.
If the Ink Out light remains on, the cartridge
may not be installed correctly. Remove the
cartridge and then reinsert it as described
above.
7
Close the ink compartment cover.
7
light
Ink Out

Advertisement

loading

  Also See for Epson Stylus Pro 10600 Archival Ink

  Related Manuals for Epson Stylus Pro 10600 Archival Ink

This manual is also suitable for:

10600