Checking Ink Levels; Replacing Ink Cartridges - Epson Stylus Pro 10600 Archival Ink Quick Reference

Checking Ink Levels and Replacing Ink Cartridges
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your
ink levels. If one of your cartridges is low, you can replace it
before you start. Or, you can wait until the ink runs out,
replace the cartridge, and then continue the job without
any loss of print quality.

Checking Ink Levels

1
Press the button until
SelecType
appears on the display.
MENU
2
Press the button. The printer's firmware number
Item
appears.
3
Continue pressing the
amount remaining for each of the 6 inks:
E*****F = full
E**** F = 3/4 full
E*** F = 1/2 full
E** F = 1/4 full
E* F = nearly empty
E F = empty
4
Press to exit the Printer Status menu.
SelecType

Replacing Ink Cartridges

When one of the
Ink Out
displayed on the control panel, the corresponding cartridge
is nearly empty. Make sure you have the correct
replacement cartridge.
EPSON Photographic Dye
• Black T499201
• Cyan T502201
• Magenta T501201
EPSON Archival ™ ink
• Black T511201
• Cyan T514201
• Magenta T513201
EPSON UltraChrome ™ ink *
• Photo Black T549100
• Matte Black T549800
• Cyan T549200
• Magenta T549300
* Your printer uses one black ink cartridge (Matte Black or Photo Black). To switch black
ink types, you have to follow a special procedure (see your Printer Guide), so be sure to
replace the black cartridge with the same type as you are currently using.
PRINTER STATUS
button to display the
Item
lights is flashing and
INK LOW
™ ink
• Light cyan T504201
• Light magenta T503201
• Yellow T500201
• Light cyan T516201
• Light magenta T515201
• Yellow T512201
• Light cyan T549500
• Light magenta T549600
• Yellow T549400
When one of the
displayed on the control panel, the cartridge is empty. To
replace the cartridge, first make sure the printer is on.
1
Push the indentation on the ink compartment cover
to release the lock and open the cover.
2
Locate the slot containing the empty ink cartridge
corresponding to the
is
the top of the clamp and pull it forward.
6
lights stays on and
Ink Out
light. Press down on
Ink Out
Continue
is
Ink Out