Hardware Key Installation; Windows Client Software Installation; Installing The Postscript Printer Driver For Windows Me - Epson Stylus Pro 10000 Installation Manual

8 | Installation Guide

Hardware Key Installation

After all the software is installed, connect the hardware key to an available USB
port on the server. After a few moments, Fiery Spark is ready to accept print
jobs.

Windows Client Software Installation

Instructions are given for installation on Windows Me and Windows 2000.
Installation on other Windows operating systems are similar. For detailed
instructions, see the Getting Started Guide on the User Software CD-ROM.
On a PC client, you need to install and configure the following software:
PostScript printer driver (see below for Windows Me; see page 9 for
•
Windows 2000)
Shortcuts to the Fiery Spark drop folder (see page 11)
•
Command WorkStation (see page 12)
•
Depending on your workflow, you can install the PostScript printer driver, the
shortcuts to the Fiery Spark drop folders, or both.

Installing the PostScript Printer Driver for Windows Me

1. Insert the User Software CD-ROM into the CD-ROM drive.
2. Click ,
Start
3. Double-click the
4. Click .
Next
, and then choose
Settings
Add Printer
.
Printers
icon.