Epson Stylus Pro 10000 Installation Manual page 13

10 | Installation Guide
7. Enter the Server Name or IP address of the Fiery Spark, then click
8. Select
Custom
9. Select the following settings:
Protocol:
•
LPR Settings:
•
• SNMP Status Enabled
Queue name (this name is case-sensitive; use lowercase letters):
•
, or
hold
Then click
Next
10. Click to close the Configure Standard TCP/IP Port Monitor dialog
OK
box.
11. Click .
Next
12. Click
Finish
box.
13. At the next screen, click
14. Click
Browse
>
English Prntdrvr
15. Click
Open
16. Click .
OK
17. Select the appropriate Fiery Spark file for your printer, then click
If you are using this printer
EPSON Stylus Pro 10000 (pigment ink)
EPSON Stylus Pro 10000 (dye ink)
EPSON Stylus Pro 5500 printer
and click
Settings
LPR
LPR Byte Counting Enabled
.
direct
.
to close the Add Standard TCP/IP Printer Port Wizard dialog
Have Disk
. Then browse to the following folder on the CD-ROM:
>
Ps_drvr
to return to the Install from Disk window.
.
.
>
Win_2000
Select this file
Fiery Spark PRO10KCF v1.0
Fiery Spark PRO10K v1.0
Fiery Spark PRO5500 v1.0
.
Next
,
print
:
Next