System Requirements; Server - Epson Stylus Pro 10000 Installation Manual

2 | Installation Guide
EPSON also provides technical assistance 24 hours a day through the World
Wide Web. You can reach EPSON Support at http://support.epson.com. At
this site, you can download drivers and other files, look at product
documentation, access troubleshooting information, and receive technical
advice through e-mail.

System Requirements

Before you install the software, make sure your computer meets the minimum
system requirements listed below.

Server

®
Pentium 4 1.2GHz (1.7GHz recommended)
•
Windows ® 2000 Professional
•
Windows 2000 Server is recommended if you have more than
Note
10 users printing concurrently, require support for SMP with more
than 2 CPUs, or require greater fault tolerance
256MB RAM (512MB RAM recommended)
•
At least 200MB free hard disk space to install the software and at least 1GB
•
free disk space for processing files (4GB or more available hard disk space
recommended)
USB connection for EPSON Stylus
•
(OHCI compliant) connection for EPSON Stylus Pro 10000
Netscape ® Communicator
•
Microsoft ® Internet Explorer version 5.0 or 5.5 with Java enabled, for
Fiery WebTools
A TCP/IP-enabled network and the IP address or computer name for the
•
Fiery Spark server
File and Printer Sharing for Microsoft Network enabled for PC clients
•
AppleTalk ®
•
® version 4.5 or 4.7 with Java enabled, or
Protocol enabled for Macintosh clients
® Pro 5500 or IEEE-1394 PCI card