P a n e l P C .
2.8.2
Touch controller.
The monitor has two different outputs for the touch controller, RS232 and USB. Always use the
i
monitor's T/S USB output to connect the touch control to the panel PC.
Connect the monitor's T/S USB (touch controller) output to a USB 2.0 port on the panel PC.
(A)The monitor's touch controller output.
(B)Generic USB 2.0 input on the panel PC.
Cable characteristics.
Fagor Automation supplies the necessary cable for the touch controller. Always use the cable
supplied by Fagor for the unit.
B
A
ü
û
2.
CNCelite
8060 8065
8070
R
. 2106
EF
ꞏ45ꞏ