Ref . 2106; Diagnosis; Accessing Panel Pc Resources From The Cnc - Fagor PPC-21W Series Manual

P a n e l P C .
4.5

Diagnosis.

The "Diagnosis" button at the top shows information about the Panel PC itself.
The "Save to file" button allows you to save the information in a file.
4.6

Accessing Panel PC resources from the CNC.

The Panel PC is configured to export its resources so that the CNC can see your hard drive
and any possible pen drives that are connected. In order for programs from any of these
storage devices to be quickly executed, it is necessary to configure them from the CNC as
network units. This operation is completed from the Windows file explorer on the CNC.
File explorer > Tools > Map network drive
4.
CNCelite
8060 8065
8070
R . 2106
EF
ꞏ71ꞏ