About The Product - Fagor PPC-21W Series Manual

P a n e l P C .
Some of the features described in this manual are dependent on the acquired software options. The active
software options for the CNC can be consulted in the diagnostics mode (accessible from the task window
by pressing [CTRL] [A]), under software options. Consult Fagor Automation regarding the software options
available for your model.
Software option
SOFT ADDIT AXES
SOFT ADDIT SPINDLES
SOFT ADDIT TOOL MAGAZ
SOFT ADDIT CHANNELS
SOFT 4 AXES INTERPOLATION LIMIT
SOFT DIGITAL SERCOS
SOFT THIRD PARTY DRIVES
SOFT THIRD PARTY I/Os
SOFT OPEN SYSTEM

About the product.

SOFTWARE OPTIONS.
Description.
Option to add axes to the default configuration.
Option to add spindles to the default configuration.
Option to add magazines to the default configuration.
Option to add channels to the default configuration.
Limited to 4 interpolated axes.
Option for a Sercos digital bus.
Option to use EtherCAT third party drives.
Option to use third party I/O modules.
Option for open systems. The CNC is a closed system that
offers all the features needed to machine parts.
Nevertheless, at times there are some customers who use
third-party applications to take measurements, perform
statistics or other tasks apart from machining a part.
This feature must be active when installing this type of
application, even if they are Office files. Once the
application has been installed, it is recommended to close
the CNC in order to prevent the operators from installing
other kinds of applications that could slow the system
down and affect the machining operations.
CNCelite
8060 8065
8070
R . 2106
EF
ꞏ7ꞏ