Bluetooth® Hands-Free Phone System - Bosch AIVIH61L2 Manual

8. Troubleshooting guide
BLUETOOTH® HANDS-FREE PHONE SYSTEM
Symptom
A cellular phone cannot be registered.
A cellular phone cannot be connected or
is disconnected after the registration is
completed.
A call to a particular phone number fails. If the system tries to make a call several times
8-10
Condition:
Possible cause
The cellular phone is not compatible with the
in-vehicle hands-free phone system.
Registration of the cellular phone has been
performed incorrectly.
The Bluetooth® setting of the in-vehicle
hands-free phone system is turned off.
The Bluetooth® setting of the cellular phone
is turned off.
The remaining battery level of the cellular
phone is low.
The wireless Bluetooth® connection may be
disrupted depending on the location of the
cellular phone.
Registration of the cellular phone is not
completed.
to the same phone number (for example: the
party does not respond to the call, the party is
out of the service area, or the call is aban-
doned before the party responds), the system
may reject a request to make a call to the
phone number.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(180,1)
Possible solution
Use a cellular phone compatible with the system.
Contact a NISSAN dealer or visit www.nissanusa.
com/bluetooth/ (for U.S. and Canada) to check
compatibility.
Check the registration procedure, and then regis-
ter the cellular phone again.
Turn on the Bluetooth® setting of the system.
Turn on the Bluetooth® setting of the cellular
phone.
Charge the battery of the cellular phone.
Do not place the cellular phone in an area
surrounded by metal or far away from the in-
vehicle hands-free phone system. Do not place the
cellular phone close to the seats or your body.
Perform registration of the cellular phone.
Turn off the cellular phone and turn it on again to
reset the connection.