How To Update Map Data (If So Equipped) - Bosch AIVIH61L2 Manual

6. Navigation (if so equipped)
. Voice guidance is not available when
[Guidance Voice] is turned off.
. Voice guidance will start when the
vehicle enters the suggested route.
Refer to the map for directions to the
starting point of the route.
. When approaching a waypoint, the
voice guidance will announce and in-
form the driver that the vehicle has
reached a waypoint. Voice guidance
will switch to the next section of the
route. When voice guidance is not
available, refer to the map for direc-
tions.
. In some cases, voice guidance ends
before arrival at the destination. Refer
to the destination icon on the map to
reach the destination.
. Voice guidance may be partially op-
erational or inoperative due to the
angle of roads at an intersection.
. Motorway exit information may differ
from the information on the actual exit
signs.
. Because it is not possible to consider
data concerning roads that are sea-
sonally available or unavailable, a
route may be displayed that does not
match the actual traffic restrictions. Be
sure to follow the actual traffic restric-
6-54
Condition:
tions while driving.
HOW TO UPDATE MAP DATA (if so
equipped)
WARNING
TO AVOID RISK OF DEATH OR SERIOUS
PERSONAL INJURY WHEN UPDATING
THE MAP SOFTWARE:
If you choose to park the vehicle
within range of a Wi-Fi connection or
a TCU (Telematics Control Unit), park
the vehicle in a secure, safe well-
ventilated location that is open to
the air. During the update process, if
you choose to park your vehicle, it
should be kept in a well ventilated
area to avoid exposure to carbon
monoxide. Do not breathe exhaust
gases; they contain colorless and
odorless carbon monoxide. Carbon
monoxide is dangerous. It can cause
unconsciousness or death.
1. Apply the parking brake.
2. Remain with the vehicle while the
update is in process.
3. Do not allow children, pets or
people who may need assistance
to remain in the vehicle while the
software is updating.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(160,1)
NOTE:
The vehicle is not required to be parked
during the map update process.
Map data can be updated via USB, Wi-Fi or
a TCU (Telematics Control Unit).
Updating with USB memory (if so
equipped)
The navigation map data can be updated
with the latest information by download-
ing a new map database to a USB memory
device and installing it in the vehicle.
For map update, use the USB memory
with the following specifications:
Supported media: USB2.0
Supported file system: FAT32
1. Push <MENU>.
2. Touch [Info] on the Launch Bar and
then touch [System Information].
3. Touch [Map Update] and then touch
[Update by USB device].
4. Touch [Save Map Information to USB].
5. Insert blank USB memory device into
the USB connection port.
"USB (Universal Serial Bus) con-
nection ports" (page 2-7)