Storing Route; Storing Avoid Area - Bosch AIVIH61L2 Manual

6. Navigation (if so equipped)
1. Touch [Settings] on the Launch Bar.
2. Touch [Navigation].
3. Touch [Address Book].
4. Touch [Saved Locations].
5. Touch [Add New].
6. Touch an appropriate method to set a
location. Refer to the search methods
used for destination setting.
"Setting destination" (page 6-10)
7. Touch [OK].
8. A message is displayed, and the ad-
dress of the location is stored in the
Address Book.
9. Adjust and edit the contents of the
stored item as necessary. Touch [OK]
to confirm.
"Editing stored location"
(page 6-30)
INFO:
. When the location is stored in the
Saved Locations, [Address Book] can
be used to search for the location.
. When 200 locations are already stored,
a new location cannot be stored until a
currently stored location is deleted.
6-28
Condition:
Storing location by moving map
1. Move to the preferred location on the
map and touch [ ] on the touch
screen display.
2. Touch [Save Location]. A message is
displayed.
3. The icon representing the stored loca-
tion is displayed on the map. Push
<MAP> to return to the current
location map screen.

STORING ROUTE

A maximum of 10 calculated routes can be
stored. Stored routes can be easily re-
trieved and set as the suggested route.
A route requires at least one waypoint in
order to be stored.
1. Push <MAP> and then touch [Route]
on the Launch Bar.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(134,1)
2. Touch [Save Route]. A confirmation
message is displayed. Select [Yes] to
store the current route.
INFO:
. At least 1 waypoint must be set for the
route to be stored.
. A stored route includes only locations
(destination and waypoints) and route
calculation conditions, not the route
itself.
. The route is stored in the first available
position number in the stored routes
list.
. When 10 routes are already stored in
the address book, a new route cannot
be stored until a route is deleted.
"Deleting stored item" (page 6-33)

STORING AVOID AREA

An Avoid Area can be stored. The Avoid
Area is an area that can be excluded from
a route, such as a road that is always
congested. Once Avoid Areas are stored,
the system avoids those areas when
calculating a route. Up to 10 Avoid Areas
can be stored.
1. Touch [Settings] on the Launch Bar.