Bosch AIVIH61L2 Manual page 164

7. Voice recognition
VOICE RECOGNITION
USING VOICE RECOGNITION SYS-
TEM
Initialization
When the ignition switch is in the ON or
ACC position, voice recognition is initia-
lized. When the initialization is complete,
the system is ready to accept voice
commands. If < > on the steering
wheel is pushed before the initialization
completes, the display will show a
message to wait until the system is ready.
BEFORE STARTING
To get the best recognition performance
from voice recognition, observe the fol-
lowing items.
. The interior of the vehicle should be as
quiet as possible. Close the windows
to eliminate the surrounding noises
(traffic noise, vibration sounds, etc.),
which may prevent the system from
correctly recognizing the voice com-
mands.
. Wait until the tone sounds before
speaking a command.
. Speak in a natural conversational
voice without pausing between words.
7-2
Condition:
. The system cannot recognize voice
commands spoken from passenger
seats.
GIVING VOICE COMMANDS
1. Push < > on the steering wheel.
Example
2. A list of commands appears on the
screen, and the system provides the
voice menu prompt.
Available category commands are dis-
played on the left side of the screen.
Speak or touch a category command
from the category command (such as
Phone, Audio, etc.) list.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(166,1)
INFO:
Some of the commands for each
.
category are shown on the right
side of the screen and they can also
be spoken without selecting a ca-
tegory.
After executing the category com-
.
mand, only the commands related
to the selected category can be
recognized.
3. After the tone sounds and the icon on
the screen changes from
speak a command. You can also select
a command by directly touching the
s c r e e n , u s i n g < / > o n t h e
steering wheel or using <TUNE
SCROLL/ENTER SETTING> on the
control panel.
INFO:
The Voice Recognition System will
pause its operation when no com-
mand is given after a few prompts.
To resume the operation, push <
on the steering wheel.
4. Continue to follow the voice menu
prompts and speak the voice com-
mands after the tone sounds until the
preferred operation is executed.
to ,
>