Bosch AIVIH61L2 Manual page 170

8. Troubleshooting guide
SYSTEM UNIT
LIQUID CRYSTAL DISPLAY
Symptom
The screen is too dark.
The screen is too bright.
A small black spot or a small bright spot
appears on the screen.
A dot or stripe pattern appears on the screen. Electromagnetic waves that are generated
Image lag appears on the screen.
Image motion displayed on the screen is slow. The cabin temperature is less than 50°F
When looking at the screen from an angle, the
screen lightens or darkens.
The screen turns blue or an error message is
displayed on the touch screen display.
8-2
Condition:
Possible cause
The cabin temperature is too low.
Screen brightness is set to the maximum
darkness.
Screen brightness is set to the maximum
brightness.
This is a typical phenomenon for liquid crystal
displays.
from neon billboards, high voltage electric
power cables, ham radios or other radio
devices equipped to other vehicles may
adversely affect the screen.
This is a typical phenomenon for liquid crystal
displays.
(10°C).
This is a typical phenomenon for liquid crystal
displays.
A system malfunction has occurred.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(172,1)
Possible solution
Wait until the cabin temperature becomes
moderate.
Adjust the brightness setting of the screen.
Adjust the brightness setting of the screen.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
Wait until the cabin temperature rises to
within 50°F (10°C) and 122°F (50°C).
Adjust the brightness setting of the screen.
It is recommended that you contact a NISSAN
dealer for an inspection.