Canon Pixma MX520 Series Online Manual page 130

The following setting items are displayed.
Items
Connection
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv6 address
IPv6 subnet prefix length
IPv6 default gateway
MAC address
IPsec settings
Pre-shared key
Printer name
Bonjour service name
("XX" represents alphanumeric characters.)
• Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out:
Printing Out Network Setting Information
Important
This printout contains valuable information about your computer. Handle it with care.
• Other settings
• Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
You cannot use the same printer name as that already used for other LAN connected devices.
You cannot use a hyphen for the initial or last character of the printer name.
• TCP/IP settings
Performs IPv4 or IPv6 setting.
• WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 7 and Windows Vista).
Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
When this setting is activated, the printer icon is displayed on the Network Explorer in Windows 7 and
Windows Vista.
WSD scan from this device
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
Timeout setting
Specifies the timeout length.
• Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Active/Inactive
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
XXX
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
XX:XX:XX:XX:XX:XX
Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Inactive
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
130
Setting