Canon Pixma MX520 Series Online Manual page 666

1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the FAX button.
The Fax standby screen is displayed.
3. Press the center Function button.
The Receive mode settings screen is displayed.
4. Use the button to select DRPD.
5. Press the right Function button.
6. Use the button to select DRPD: FAX ring pattern, then press the OK button.
The DRPD: FAX ring pattern screen is displayed.
7. Select the ring pattern that your telephone company assigned to your fax number, then press the OK
button.
8. Press the Back button.
The Receive mode settings screen is displayed.
9. Press the OK button.
The Fax standby screen is displayed.
About the Receive Mode
You can select the receive mode suitable for your fax use conditions: whether you use a dedicated line for
fax, etc.
Receive Your fax use
mode condition
When mainly
receiving voice calls
TEL
(with a telephone or
priority
answering machine
mode
connected to the
machine):
When a call incomes, the telephone will ring.
Pick up the handset.
If the call is a voice call, talk on the telephone.
If the call is a fax, hang up the handset after the machine starts
receiving the fax.
Note
The machine can receive a fax automatically without the handset
being picked up when a call incomes (Manual/auto switch). And,
the machine can receive a fax automatically when you pick up the
handset or when the answering machine answers a call that is a
fax (User-friendly reception).
Advanced setting in TEL priority mode
Receiving operation