Canon Pixma MX520 Series Online Manual page 555

A Message for Faxing Is Displayed on the LCD
If a message is displayed on the Fax standby screen, take the corresponding action described below.
Message
Auto redial
This group dial cannot be used.
Coded speed dial ##
Replace the receiver.
Try again in black & white.
Failed to connect.
Received in memory.
The machine is waiting to redial the recipient's number
because the line was busy or the recipient did not answer when
you tried to send a document. Wait for the machine to
automatically redial the number. If you want to cancel
automatic redialing, wait until the machine starts dialing the
number, then press the Stop button. You can also delete the
document from machine's memory to cancel automatic
redialing.
Resending Faxes (Redialing a Busy Number)
* "##" represents a two-digit number.
You selected a coded speed dial code to which a group is
registered with the Hook button pressed.
A coded speed dial code to which a group is registered cannot
be used in this way.
The handset is not placed in the handset cradle correctly.
Replace the handset correctly.
The recipient's fax machine is not color-compatible.
Press the Black button to resend the fax.
Alternatively, you select Send in black & white for Color
transmission in Advanced FAX settings under FAX
settings. The machine converts color documents into black &
white data if the recipient's fax machine does not support color
faxing.
Advanced FAX settings
The telephone line cable with a modular plug may not be
plugged in properly.
Make sure that the cable is plugged in properly, and resend the
fax after a while. If you still cannot send the fax, select OFF for
Dial tone detect in Advanced FAX settings under FAX
settings.
Advanced FAX settings
If the machine receives a fax under one of the following
conditions, the machine will not be able to print the received fax
and will store it in the machine's memory. When the problem is
resolved as described, the fax stored in the machine's memory
is printed automatically.
• The amount of remaining ink is insufficient to print a fax:
Replace the FINE cartridge.
Replacing a FINE Cartridge
Note
You can set the machine to forcibly print a received
fax even if the ink has run out.
Set Print when out of ink in Auto print settings
under FAX settings to Print.
However, part or all of the fax may not be printed since
the ink has run out.
Also, the contents of the fax will not be stored in the
machine's memory.
If the ink has already run out, we recommend that Do
not print be selected for Received documents in
Auto print settings under FAX settings to store the
received fax in the machine's memory. After you
replace the FINE cartridge and select Print for
Received documents in Auto print settings, the fax
Action