Attaching The Scanned Data To E-Mail Using The Operation Panel Of The Machine - Canon Pixma MX520 Series Online Manual

Attaching the Scanned Data to E-mail Using the Operation
Panel of the Machine
You can attach scanned data to an e-mail using the operation panel of the machine.
Before attaching scanned data to an e-mail, confirm the following:
• MP Drivers are installed.
If MP Drivers are not yet installed, insert the Setup CD-ROM into the computer's disc drive, then install
MP Drivers.
• The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB or LAN cable while the machine is in operation, or when the
computer is in the sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified.
Network Scan Settings
• The mail software and the file name are specified in Canon IJ Scan
Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of
Canon IJ Scan Utility:
Settings Dialog Box
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the SCAN button.
The screen for selecting to which you save the data is displayed.
Note
If the Scan standby screen for forwarding the data to the USB-connected computer is displayed
on the LCD, press the left Function button to display the screen for selecting to which you save
the data.
3. Select Attach to E-mail, then press the OK button.
4. Use the button to select the computer to forward the scanned data, then press
the OK button.