Current SILENT TRAC Setup Manual page 3

4. PAIR AND ADD THE DEVICES
In the app under devices, hit the + sign. See Figure 5.
On any drapery you wish to pair to the bridge (you can add more
than one devide at a time), pull down and release the Pendant once
to start the drapery, then once to stop it. See Figure 6.
If you are pairing a third party device, follow that manufacturers
instructions to put the device into pairing mode.
You will see the device pop up in the menu on your Smart Phone
screen. Select the appropriate device, using the "identify" button
if needed. See Figure 7.
Once the device has been identified, hit "register", then name the
device.
Repeat step 4 for adding any additional devices.
Once your devices have been added, follow the prompts in the app
to set up groups, scenes, and schedules as desired.
Beach House
Figure 5 - Hit the + to add a device
Figure 6 - Pull down and release the pendant twice
3
2x
Figure 7