Download The App - Current SILENT TRAC Setup Manual

For additional help during installation of your drapery track, visit www.currentproductscorp.com/support/drapery-track

1. DOWNLOAD THE APP

Download the Current Products Corp. app from the Google Play
Store or the App Store. Follow the prompts to set up your account.
2. POWER THE BRIDGE
Find an outlet in a location central to the drapery you are installing
in the home. Insert the micro-usb end of the included power cable
into the power port on the bridge. Plug the other end of the cable
into an outlet. See Figure 1.
The LEDs on the bottom of the bridge will be solid red and solid
green during start up. The LEDs will then turn solid red. See Figure
2.
Enable the Bluetooth on the bridge when prompted. The app will
ask you to press and release the recessed button on the bottom of
the bridge. The LED lights will turn solid blue and solid red. See
Figure 3.
3. CONNECT THE BRIDGE
During the set up process, the app will ask you to scan the QR code
located on the bottom of the bridge. Scan the code when prompted.
The LED will turn solid green to reflect that the bridge is being
connected to your account. See Figure 4.
Following this step skips the process of having to select a network
and wil connect to the one being used.
Your bridge is now connected to your account.
I. Setup with the bridge with app
or call 1-844-307-7435.
LEDs
Figure 3 - Press and release the recessed button
Figure 4 - Scan the QR Code on the bottom of the bridge
2
Figure 1 - Plug in the bridge
Solid Blue
Bluetooth Enabled
Solid Green
Connected to Server
Solid Red
No Internet
Figure 2 - LED indicators
Flashing Blue
Join Mode
Flashing Green
Command Received
Flashing Red
Not Registered/Error