Lexmark CX417de User Manual page 254

Troubleshooting
Remove packaging material, [area name]
1
Remove any remaining packing material from the indicated location.
2
From the printer control panel, touch Continue to clear the message. For non‑touch‑screen printer
models, press
Remove paper from standard output bin
Remove the paper stack from the standard bin.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see
the instruction sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.
Replace all originals if restarting job.
From the printer control panel, try one or more of the following:
•
Select Scan from automatic feeder, and then press
after the last successful scan job.
•
Select Scan from flatbed, and then press
after the last successful scan job.
•
Select Finish job without further scanning, and then press
Note: This does not cancel the scan job. All successfully scanned pages will be processed further
for copying or e-mailing.
•
Select Restart Job, and then press
scan job.
•
Select Cancel Job, and then press
Remove defective disk [61]
Remove and replace the defective printer hard disk.
Replace defective [color] cartridge [31.xy]
Replace the defective toner cartridge to clear the message. For more information, see the instruction sheet
that came with the supply.
Note: If you do not have a replacement toner cartridge, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.
to confirm.
to restart the scan job with the same settings from the previous
to clear the message and cancel the scan job.
to continue scanning from the ADF immediately
to continue scanning from the scanner glass immediately
to end the last successful scan job.
254