Transporting The Printer - Epson Stylus Color Stylus Color IIs User Manual

Transporting the Printer

If you need to transport your printer, carefully repack it in the
original box and packing materials as follows:
1. Turn off the printer, if you have not already done so.
2. Open the printer cover and make sure that the print head
is locked in the far right position. If it isn't, turn on the
printer, wait about 10 seconds, and turn it off.
c
3. Use a strong adhesive tape to secure the print head to the
side of the printer.
4. Unplug the power cord from the electrical outlet.
5. Disconnect the interface cable from the printer.
6. Remove any paper from the sheet feeder and remove the
paper support.
7. Push in the output tray extension and rotate the output tray
until it is beneath the printer.
8. Attach the protective materials to the printer. See the Notice
Sheet that was packed with the printer.
9. Repack the printer and attachments in the original box.
Be sure to keep the printer flat as you transport it. If you notice
problems with the printed image after transporting the printer,
clean the print head as described on page 3-2. If the printed
image is misaligned, calibrate the printer as described in the
next section.
3-14
Maintenance
Caution:
Do not remove the ink cartridges when transporting the
printer. Transporting the printer without the cartridges
installed can damage the printer.