Epson Stylus Color Stylus Color IIs User Manual page 68

6. Press Enter to select Calibrate. The printer starts calibrating.
7. The next screen prompts you to enter an offset value to align
the print head.
Wait for 1 minute while the printer prints a page of multiple
patterns of vertical lines, each of which is assigned an offset
value. Look for the pattern that is most closely aligned.
Aligned
8. Enter the offset value of the pattern that is most closely
aligned and press Enter. The printer prints another sheet to
verify that the alignment is correct.
9. If the vertical lines on the sheet are aligned, select Done.
If the lines are not aligned, select Re-calibrate; then press
Enter to repeat the calibration.
If you notice later that the vertical alignment of your printed
pages is off, repeat the calibration procedure.
3-16
Maintenance
|
|
|
|
Not aligned