Cleaning the Printer
If you want to clean the printer, follow these steps:
1. Turn off the printer and disconnect any cables connected
to it. Be sure to keep the printer cover closed as you clean it.
2. Remove any paper or other media from the sheet feeder.
3. Carefully clean away loose dust and dirt with a soft brush.
4. Clean the exterior of the printer with a soft cloth dampened
with mild detergent.
5. To clean ink out of the printer's interior, wipe it gently with
a damp cloth.
Caution:
c
Never use alcohol or thinner to clean the printer; these
chemicals can damage the components and the printer case.
Do not use a hard or abrasive brush; these can scratch the
printer surfaces.
Do not allow water to get on the printer mechanism or any
electronic components.
Do not touch the gears inside the printer.
Do not spray inside the printer with lubricants or oils; they
can damage the printer mechanisms.
Maintenance
3-13
Need help?
Do you have a question about the Stylus Color Stylus Color IIs and is the answer not in the manual?