Epson Stylus Color Stylus Color IIs User Manual page 74

If you still see incorrect or garbled characters, try printing a
demonstration page to see if the problem is with your printer;
see Chapter 2 for instructions. If the demonstration page prints,
you may have a problem with your application software or
your printer cable. Make sure your cable is connected securely
and see your program's documentation for troubleshooting
information. If no demonstration page prints, you may have a
problem with your printer; contact your EPSON dealer or
authorized EPSON servicer.
You see incorrect colors in your printout.
Make sure EPSON Stylus COLOR IIs is selected as the default
Windows printer driver.
Check that the printer driver's Brightness and Contrast
settings are appropriate for the image.
If you scanned the image, the different color interpretation
technologies used by your scanner, monitor, and printer can
never produce an exact color match with the original image.
However, check your scanner documentation for utilities you
can use to calibrate your scanner to your monitor and printer to
more closely match colors.
If you are printing from a DOS application using economy
mode, black text or graphics will appear gray on your printout;
turn off economy mode to achieve deeper blacks.
Printing starts too high or too low on the page, or the page
length or margins are not what you expect.
Make sure you selected the correct Paper Size option in the
printer driver; see Chapter 2 for instructions.
Use your software program to adjust the margins, or change
the number of lines per page, or change the page length setting
to match the paper you are using.
4-6
Troubleshooting