Tripod Data Systems SURVEY PRO User Manual page 79

send the rod man out about 100 feet before continuing. Tap
the .Stake >.
Tap the Shot button and enter the following shot data:
c.
Angle Right: 115
Zenith: 90
Slope Dist: 99.8
and then tap
h. According to the screen, the rod must
now move FORWARD by 0.089 feet to
be over the design point. We will
assume that this is close enough and
will store the point from this shot by
tapping the Store... button.
i. Enter the following point information:
Point Name: 5
Description: Staked
and tap
first Stake Points screen.
5. Stake the next design point.
a. We want to stake the next design point
in the project. Make sure 3 is in the
Design Point field and then press
Solve > . This will send you to the
second Stake Points screen.
b. The information needed to locate the
next design point is displayed. When
connected to a total station, you would
turn the total station horizontally to
115°00'00", vertically to 90°00'00" and
button to continue to the third screen.
to continue.
Conventional Fieldwork
. This will return you to the
69