opti-solar SP6000 Handy Ultra User Manual page 66

Step 5. Be sure to select battery type as "PYL" in LCD program 5.
If communication between the inverter and battery is successful, the battery icon
flash. Generally speaking, it will take longer than 1 minute to establish communication.
Active Function
This function is to activate lithium battery automatically while commissioning. After battery wiring and
commissioning is successfully, if battery is not detected, the inverter will automatically activate battery if the
inverter is powered on.
WECO
Step 1. Use a custom-made RJ45 cable to connect inverter and Lithium battery.
Please take notice for parallel system:
1. Only support common battery installation.
2. Use one custom-made RJ45 cable to connect any inverter (no need to connect to a specific inverter) and
Lithium battery. Simply set battery type of this inverter to "WEC" in LCD program 5. The remaining
inverters are set as "USE".
Step 2. Switch on Lithium battery.
64
on LCD display will