Signal Lines For Motors With Drive-Cliq Encoder - Siemens Simogear BA 2331 Translation Of The Original Operating Instructions

Note
The cable shielding, made up of as many strands as possible, must have a high electrical
conductivity. Braided shields made of copper or aluminum are well suited.
2.4.2

Signal lines for motors with DRIVE-CLiQ encoder

Use pre-assembled MOTION-CONNECT cables to connect motors with a DRIVE-CLiQ interface.
You will find detailed information in the printed or online version of the Catalog D 21.4 in
Chapter "SIMOTICS Servomotors"
(https://support.industry.siemens.com/cs/document/109747019/).
BA 2331
Operating Instructions, 07/2021, A5E50553480A/RS-AB
Installation of the rotary encoder
2.4 Connecting to a converter
13