Technical Specifications; General Technical Specifications - Siemens Simogear BA 2331 Translation Of The Original Operating Instructions

Geared motor with drive-cliq encoder

Table of Contents

Technical specifications

Encoder designation

Resolution

Absolute position

Angular error

Observe the ambient temperature in Chapter Intended use (Page 7).

The external DRIVE-CLiQ rotary encoder components are manufactured out of the following

materials:

• Torque arm, hollow shaft and clamping ring V2A

• Enclosure: EN AW-6082 T6

• Flange: EN AW-6082 T6

4.1

The most important technical data is stamped on the rating plate of the geared motor.

This data, together with the contractual agreements for the geared motors, determines the

limits of intended use.

In the case of geared motors, a rating plate attached to the motor usually indicates the data

for the entire drive.

In certain cases separate rating plates are attached to the gearbox and the motor.

You can find more detailed information in the BA 2330.

BA 2331

Operating Instructions, 07/2021, A5E50553480A/RS-AB

DQ encoder for SIMOGEAR 2KJ3

Absolute encoder, 22-bit

single-turn

AS22DQC

4,194,303 (22-bit)

Yes, one revolution

± 100 "

Absolute encoder, 22-bit

multiturn

AM22DQC

4,194,304 (22-bit)

Yes, 4086 revolutions (12-bit)

± 100 "

Table of Contents