To 2.5" Drive Trays; Enabling Nvme Raid - Supermicro SuperServer 510P-M User Manual

6.3 3.5" to 2.5" Drive Trays

•
Tool-less black hot-swap 3.5" to 2.5" Gen 5.5 drive tray (MCP-220-00138-0B, orange tab,
w/ key lock, clip design)
•
Black hot-swap 3.5" to 2.5" Gen 4 drive tray (MCP-220-00043-0N)

Enabling NVMe RAID

RAID for NVMe SSDs must be enabled through the UEFI BIOS.
1. Install the patch as described in the Restrictions and Requirements section on a
previous page.
2. Reboot the server.
3. Press [DEL] key to enter BIOS.
4. Switch to Advanced > Chipset Configuration > North Bridge > IIO Configuration >
Intel® VMD Technology.
5. Enable the VMD according to the following rules.
•
For M.2 NVMe or NVMe AIC, enable the VMD according to which AOC card/slot it used.
Examples for some U.2 configurations follow.
6. Press [F4] to save the configuration and reboot the system.
7. Press [DEL] to enter BIOS.
8. Switch to Advanced > Intel(R) Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
9. Set Name.
10. Set RAID Level.
Chapter 6: Optional Components
76