Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Outdoor GreatRoom Company Alcott
Summary of Contents for Outdoor GreatRoom Company Alcott
- Page 1 Alcott Fire Table Installation Instructions for ALC-1224...
-
Page 2: Table Of Contents
IMPORTANT Please consult your Crystal Fire instruction manual for detailed instructions and important information related to the burner installation including: lighting and operating instructions, safety information, and proper tightening of connections with two wrenches. DO NOT ATTEMPT TO INSTALL CRYSTAL FIRE BURNER WITHOUT FIRST CONSULTING THE CRYSTAL FIRE OWNER’S MANUAL. -
Page 3: Included With Your Fire Pit
Included With Your Fire Pit Alcott 1224 base (Control Panel Installed) ALC-1224-BASE Antique Timber Supercast Top and Burner Cover 3648-1224-AT & 3648-1224- AT-C 1224 Crystal Fire Plus Burner with Brown Trim CFP-1224-BRN Refer to Crystal Fire Plus Manual for items included with Crystal Fire Plus... -
Page 4: Un-Packaging
Assembly Instructions 1. Un-packaging Do not discard any packaging until assembly is complete and unit is tested. Keep all included manuals in a safe place for future reference. 2. Base Placement Place base in desired final location. ... -
Page 5: Cf-Sparker Installation
3. CF-SPARKER Installation Locate CF-SPARKER inside of crystal fire burner box. Remove CF-SPARKER cap and hex nut. Insert AAA battery (not included) with + end out. Install CF-SPARKER into control panel as shown below. Depress CF-SPARKER button to test your ... -
Page 6: Gas Connections
5. Gas Connections See Crystal Fire Plus instructions for burner installation. All gas connections were completed at the factory. Check all connections for leaks. If needed, tighten connection with 2 wrenches and re-check for leaks. Attach burner valve to control panel with provided screws as shown below. -
Page 7: Electrode Installation
6. Thermocouple Installation • Refer to Crystal Fire Plus instruction manual for detailed attachment of thermocouple. • Attach thermocouple to burner valve as shown below. 7. Electrode Installation Plug both BLACK wires hanging from the burner into the back of the CF-SPARKER. If an orange wire is present, do not use it. -
Page 8: Propane Tank Installation
8. Propane Tank Installation With the propane tank valve and fire pit valve off, attach the propane regulator to the propane tank. Hand tighten, do not use a wrench for this connection. Insert propane tank into base by sliding it past the red dotted line shown above. -
Page 9: Fire Media Installation
9. Fire Media Installation • Scatter all included glass beads, lava rock, or other approved fire media evenly across entire burner surface. DO NOT OPERATE CRYSTAL FIRE PLUS BURNER WITHOUT INCLUDED GLASS BEADS OR OTHER APPROVED FIRE MEDIA DO NOT OPERATE CRYSTAL FIRE PLUS BURNER WITH BURNER COVER IN PLACE... -
Page 10: Operating Instructions
10. Operating Instructions Before operating your Alcott 1224 fire pit, ensure all gas connections are properly tightened and thoroughly leak checked. Refer to the Crystal Fire Plus Manual for information on proper leak checking and other critical safety information. ... - Page 11 IMPORTANT Please consult your Crystal Fire instruction manual for detailed instructions and important information related to the burner installation including: lighting and operating instructions, safety information, and proper tightening of connections with two wrenches. DO NOT ATTEMPT TO INSTALL CRYSTAL FIRE BURNER WITHOUT FIRST CONSULTING THE CRYSTAL FIRE OWNER’S MANUAL.
- Page 12 Thank you for purchasing an Outdoor GreatRoom Company product! This fire pit was made with pride in the USA. Warranty: Fire pit tables are covered under a 1- year manufacturer’s warranty. Please visit https://www.outdoorrooms.com/product-registration to register your product. 14400 Southcross Drive West • Suite 100 • Burnsville, MN 55306 Toll Free: 1-866-303-4028 •...
Need help?
Do you have a question about the Alcott and is the answer not in the manual?
Questions and answers