Contents Required Tools……………………………………………..……………..2 Placing and assembling the Table…….………………………..…3 CF-SPARKER Installation…………………….….…………………..….6 Gas Connections…………….……………………………………..……...6 Thermocouple Installation……………………………………...…….7 Electrode Installation…………………………………………….……...7 Locating Propane tank………………………………………..………...8 Locating Natual Gas Line………………….………………….………..9 Wood Care……………………………………..……………………….…….9 Poly wood Care …………..……………………………………………...10 Fire Media Installation………………….….…………………..…..…10 Product Registration ……………………………………………….… 11 Service Parts …………………………………………………….……..… 12 Required Tools •...
Placing and Assembling the Fire Pit table 1. Remove all components from packaging. 2. Move the base sections to desired location and set into place spaced approximately 28 ½” from each other. 3. When locating your table, refer to the Crystal Fire® Plus manual and maintain clearance to combustibles.
Page 4
4. Place tank base in desired location, then adjust leveling legs on bottom to ensure tank door operates smoothly. 5. Use Phillips screwdriver and supplied bolts (6) to attach wood top to tank base. 6. Using a Philips screwdriver and supplied bolts (4), attach the support base to the top as shown in the image below.
Page 5
7. Align concrete top to be centered on tank base & overhanging rear to match sides. *DO NOT SLIDE SUPERCAST ON WOOD TOP* 5/8” *May have to adjust level legs to get Supercast top to sit flat* If the table is relocated, remove Supercast top while moving. Failure to do so may result in the wood frame warping.
CF-SPARKER Installation • Remove CF-SPARKER cap and hex nut. Insert AAA battery (not included) with + end out. • Install CF-SPARKER into control panel as shown below. • Depress CF-SPARKER button to test your sparker. Locate and orient sparker box on control panel as shown.
Thermocouple Installation • Refer to Crystal Fire® Plus instruction manual for detailed attachment of thermocouple. • Attach thermocouple to burner valve as shown below. Electrode Installation • Connect igniter and ground wire to sparker box. Both wires can connect to either connection point. The unit will operate in either configuration. •...
Locating your Tank (If applicable) • Tilt your propane tank into the slide out tank drawer. • With the propane tank and control valve in the OFF position, connect the Regulator Hose, included with the Crystal Fire® Plus burner, to your propane tank.
Locating Natural Gas Line (If applicable) 17-3/4 x 4 Top View of Base with Door • Locate natural gas stub inside of the red outline to avoid clearance issues with the door for natural gas installations Iroko Wood Care Annual maintenance: To maintain the natural wood top, it is recommended to clean with an exterior wood cleaner and apply oil (Cabot Australian Timber Oil, Natural color).
Regular cleaning: As with all wood furniture, regular cleaning is essential to keep the wood free from pollen and dirt. When cleaning, do not pressure wash the wood, wipe with a damp cloth minding the direction of the wood grain. Cover or store indoors when not in use. Repairing dents and scratches: Lightly sand the area with 200 grit sandpaper.
IMPORTANT Please consult your Crystal Fire® Plus instruction manual for detailed instructions and important information related to connecting your linear burner, including safety information, proper tightening of connections and full burner installation and lighting instructions. DO NOT ATTEMPT TO INSTALL CFP1242 BURNER WITHOUT FIRST CONSULTING THE MANUAL.
Thank you for purchasing an Outdoor GreatRoom Company product! This fire pit was made with pride in the USA. Service Parts • Refer to Crystal Fire® Plus instruction manual for burner service parts Part Part number Supercast – Iroko & Birchwood 2554-1242-LIN Supercast –...
Need help?
Do you have a question about the UPT-1242-CGR and is the answer not in the manual?
Questions and answers