Attaching The Bracket (Bvm-F250); Mounting The Unit In A Rack (Bvm-F170) - Sony BVM-F250 Operation Manual

Attaching the Bracket
(BVM-F250)
You can prevent falling of the monitor by using the
supplied bracket.
1
Remove three screws from the bracket.
Bracket (supplied)
2
Attach the bracket on the rear panel of the monitor
with the three removed screws.
3
Attach a piece of string, etc. to the bracket and secure
it to the floor or wall.
Bracket
String, etc.
Mounting the Unit in a
Rack (BVM-F170)
To mount the unit in an EIA standard 19-inch rack, use the
supplied rack mount brackets and screws.
1
Remove the four feet from the bottom of the unit.
2
Attach the rack mount brackets to each side of the unit
with the rack mount attachment screws.
Rack mount bracket
3
Screw the rack mount brackets to the rack to mount the
unit.
Use the commercially available screws that match the
size of the rack's holes.
Rack
Attaching the Bracket (BVM-F250) / Mounting the Unit in a Rack (BVM-F170)
Rack mount
attachment screws
27