Loading Continuous Paper Onto The Rear Push Tractor - Epson LQ-2180 Quick Reference Manual

Loading Continuous Paper Onto the Rear Push Tractor

To load continuous paper onto the rear push tractor, follow the steps below.
Caution:
c
Do not load continuous paper with labels onto the rear push tractor; the labels may come off the
backing sheet and jam the printer.
1
paper guide cover
Open the paper guide cover and
remove the paper guide.
To remove paper from the paper path,
press the Load/Eject button. The
printer feeds the paper to the standby
position, where you can remove the
paper from the printer.
4
2
paper guide
Open both sprocket covers, and fit the
first four holes of the paper, printable
side down, over the tractor pins. Then
close the sprocket covers.
Note:
Load continuous paper that has a clean, straight
edge to avoid paper jams.
If you load continuous paper which is a
different size or thickness, you need to
adjust the position of the sprocket units
or change the paper thickness lever
setting. See Chapter 2 of the User's Guide
for instructions.